Archiv verlassen und diese Seite im Standarddesign anzeigen : HomeServer connection to USB 2130 USB REG
Ich hofe es ist mir vergeben das ich nicht in Deutsch eine frage stel?
Dear readers,
I have an EIB installation with an JUNG 2130 USB REG connection. Is it possible to connect the Gira Homeserver to it? For example using a RS232 to USB converter cable?
Thanks!! Danke sehr!!
Maarten
Hi maarten,
sorry, but this is not possible!
Regards,
Michael
Hi Michael,
So I really need:
– Instabus bus coupler UP 2 (Article No. 0645 00)
– Instabus data interface FT 1.2 (Article No. 0504 xx)
– Instabus RS232 access line (Article No. 0645 00)
Or can I use a Jung EIB-Datenschnittstelle seriell RS-232 REG (Jung 2131REG)?
Thanks! Danke Sehr!
Maarten
So I really need:
– Instabus bus coupler UP 2 (Article No. 0645 00)
– Instabus data interface FT 1.2 (Article No. 0504 xx)
– Instabus RS232 access line (Article No. 0645 00)
you need this
Even the access line? Why don´t they include it with the Homeserver?
Danke,
Maarten
Hi Maarten,
the HS needs an FT1.2-Serial Conenction or a IP connection over the Siemens IP-router N146 (NOT N148!!!) or the Gira IP-Router "1030 00 REG Plus" to can access the KNX/EIB-Bus.
If the serial FT1.2 would be included into the Homeserver, Gira (DaCom) has to certificate the HS at the Konnex (for many €€€ :)) because it is THEN an KNX/EIB-Part.
Regards,
Michael
Alles klar. So it has to be a special serial connection not a ´normal´one. So the cheapest solution is the list from the GIRA installation manual.
Danke sehr. :)
Maarten
Powered by vBulletin® Version 4.2.4 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.