grudziu
16.02.09, 18:08
Hi.
I have three conference rooms with moving walls, so sometimes it can become into six separated rooms. The state of wall is shown by the binary input (GIRA 1118 00). In each rooms there are four lights dimming circuits (2 x 1-10V and 2 x normal lights). In my case summary I need to transfer 36 group addresses - 12 type of on / off (1-bit), 12 DIMM (4-bit) and 12 scenes with memory (1-Byte).
I'm thinking about ABB (Busch-Jaeger) ABL / S 2.1 module (and the logic gate bidirrectional from application). There is a limit of 50 group addresses. Is this a good sollution?
Is there some risk f.e. that the information (telegram) can fall into loop when the walls are open?
------------
Hi.
Ich habe drei Konferenzräume mit beweglichen Wänden, so dass manchmal kann es in sechs getrennten Räumen. Der Zustand der Wand wird durch den binären Eingang (GIRA 1118 00). In jedem Zimmer gibt es vier Lichter Dimmen Schaltungen (2 x 1-10V und 2 x normal leuchtet). Ich brauche 36 Gruppe-Adressen transferen - 12 x On / Off-(1-Bit), 12 x DIMM (4-bit) und 12 x Szenen mit Speicher (1-Byte).
Ich denke etwa ABB (Busch-Jaeger) ABL / S 2.1-Modul (und die Logik-Gate bidirrectional). Es gibt eine Grenze von 50 Gruppe-Adressen. Ist das eine gute Sache (sollution)?
Gibt es eine Gefahr f.e. dass die Informationen (Telegramm) kann sich in Schleife, wenn die Wände sind offen?
:shithappe :)
sorry for my Deutsch :-)
I have three conference rooms with moving walls, so sometimes it can become into six separated rooms. The state of wall is shown by the binary input (GIRA 1118 00). In each rooms there are four lights dimming circuits (2 x 1-10V and 2 x normal lights). In my case summary I need to transfer 36 group addresses - 12 type of on / off (1-bit), 12 DIMM (4-bit) and 12 scenes with memory (1-Byte).
I'm thinking about ABB (Busch-Jaeger) ABL / S 2.1 module (and the logic gate bidirrectional from application). There is a limit of 50 group addresses. Is this a good sollution?
Is there some risk f.e. that the information (telegram) can fall into loop when the walls are open?
------------
Hi.
Ich habe drei Konferenzräume mit beweglichen Wänden, so dass manchmal kann es in sechs getrennten Räumen. Der Zustand der Wand wird durch den binären Eingang (GIRA 1118 00). In jedem Zimmer gibt es vier Lichter Dimmen Schaltungen (2 x 1-10V und 2 x normal leuchtet). Ich brauche 36 Gruppe-Adressen transferen - 12 x On / Off-(1-Bit), 12 x DIMM (4-bit) und 12 x Szenen mit Speicher (1-Byte).
Ich denke etwa ABB (Busch-Jaeger) ABL / S 2.1-Modul (und die Logik-Gate bidirrectional). Es gibt eine Grenze von 50 Gruppe-Adressen. Ist das eine gute Sache (sollution)?
Gibt es eine Gefahr f.e. dass die Informationen (Telegramm) kann sich in Schleife, wenn die Wände sind offen?
:shithappe :)
sorry for my Deutsch :-)